Polyjuice Part 2

Part 2 (unable to take screen shots at this time)

Step 1: Add 3 measures of boomslang skin to the cauldron. To do this pick up some boomslang skin from the jar with your mouse, it will automatically take 1 measure and drag it across to your cauldron and release to let it go in. Repeat until the counter says you have 3


Step 2: Add 1 measure of bicorn horn to the mortar. The bicorn horn is the powder, pick it up and drag across to your cauldron.

Step 3: Crush into a fine powder. Continuesly click on the pestle and a  meter will start to fill up, do this until the  meter reaches the point in between the 2 lines and it will also turn green (the meter will turn green not the potion) to show you've done it. Note> it’s easier and quicker to click on the actual mortar instead of the pestle.

Step 4: Add 1 measure of crushed bicorn horn to your cauldron. The crushed bicorn horn will be the grey powder form in your mortar, pick some up and drag it across to your cauldron, exactly the same as you did in step 2.

Step 5: Heat for 20 seconds. Click on the red button beneath your cauldron and this will make a meter come up with 2 lines. The red button will make the meter fill up at a fast rate, wait until it reaches in between the 2 lines, at this point a timer will appear. Then click the orange button which will still increase the meter but at a slower speed. BEFORE the meter goes above the 2 lines (which is where you must keep it between for the 20 seconds) click the blue button which will decrease the meter. Keep alternating between the orange and blue to increase and decrease the meter as necessary, keeping it between the 2 lines at all times. When the 20 second timer runs out click the blue button to turn off the heat otherwise you risk your cauldron exploding!


Step 6: Wave your wand and wait. To wave your wand just drag it wand (by the bag of standard ingredients to the bottom right of the table) and move it all over the cauldron to wave it. Sparks will indicate you're doing it properly, then let go of your wand to finish waving it. There's no time limit for how long you need to wave it for just as long as you stop waving before the purple hourglass timer empties.


... 18 - 24 LONG hours later...


Second stage.

Step 1: Add 1 scoop of lacewings to the cauldron. Lay the bottle down horizontaly on the table and grab a lacewing as they start falling out of the bottle then take it across to your cauldron and release it inside. See screenshot below to get a better understanding. If you pour it in the normal way by balancing the bottle on the edge of the cauldron you have a very high chance of accidently adding 2 as they come out way too fast and you only get a split second to pull the bottle away before you add more.

Step 2: Stir 3 times anti-clockwise. Anti- clockwise is in this direction <--  Grab the spoon and drag it in big circles, bigger than the cauldron itself until the counter says you've done it 3 times.


Step 3: Add the Slytherin hair to the cauldron. Pick up one piece of hair and drag it across to your cauldron then let go to release. You only need to do this once.

Step 4: Wave your wand to complete the potion. To wave your wand just drag it wand (by the bag of standard ingredients to the bottom right of the table) and move it all over the cauldron to wave it. Sparks will indicate you're doing it properly, then let go of your wand to finish waving it. There's no time limit for how long you need to wave it for just as long as you stop waving before the purple hourglass timer empties.

Well done if you were successful :) if not don't get too mad that it only took 18 - 24 hours to brew